#10-24 (3/16") x 24 TPI x 3 Foot (914mm) UNC Coarse Stainless A4-70 G316 Allthread Threaded Rod IFI 136C

Not sure what size or thread you have or need?

Compare your allthread to our visual size guide to confirm the diameter, thread and pitch before you order.

If you know the fastener diameter

Compare your fastener to our visual size guide to confirm size, pitch and length.

Open the identification guide ›

About UNC / BSW Threaded Rod

Imperial continuous-thread rod, supplied in 3 ft (914mm) lengths. UNC (Unified National Coarse) follows IFI 136C, the American profile with a 60-degree thread flank. BSW (British Standard Whitworth) follows AS3501, the Whitworth profile with a 55-degree flank. The two are NOT interchangeable: a UNC nut will not run on a BSW rod and vice versa. Check the standard on the SKU before ordering so it matches the thread you're working with.

Frequently Asked Questions

Material & Coating

Stainless A4-70 G316 Austenitic stainless steel. Property class 70 designates a minimum tensile strength of 700 MPa with a 0.2 percent proof stress of 450 MPa. Lightly magnetic in cold-worked form, which does not affect corrosion performance.

Grade selection A2-70 G304 is the general-purpose stainless grade for outdoor and most chemical environments. A4-70 G316 contains 2 to 3 percent molybdenum, giving substantially better resistance to chlorides; A4-70 G316 is the preferred grade for marine, coastal and pool environments.

Important Do not pair stainless fasteners with plain or galvanised steel components in wet service. The galvanic potential difference accelerates corrosion of the less-noble metal.

Class Stainless fasteners are classified by property class: A2-35 / A2-50 / A2-70 in G304 stainless, and A4-40 / A4-70 / A4-80 (Bumax 88) in G316. The first digit indicates the alloy and the second is the minimum tensile strength in 100 MPa increments (e.g. A4-70 = 700 MPa). See the head marking chart and full strength table.

Thread Pitch & Terminology

Thread Pitch (Imperial) Imperial fasteners measure thread pitch as TPI (threads per inch), the number of thread peaks per inch of fastener length. Imperial systems include UNC (coarse), UNF (fine), BSW (Whitworth) and BSF (British Standard Fine). This product has 24 TPI, meaning 24 thread peaks per inch.

How to Measure

Fastener Length This product has no head, so the length is the overall length - measured from one end to the other.

Length This listing is the 3 foot (914mm) rod. Cut to the lengths you need on site.

Still not sure? See our step-by-step identification guide for help measuring your fastener.

Resources

Pricing & Delivery

Includes GST, a Tax Invoice and Free Standard Delivery anywhere in Australia.

Buy with Confidence

15+ years selling online · 25,000+ stock lines · 200 million pieces ex-stock in Brisbane QLD.

Disclaimer

Technical data Researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately.

Measurements Sizes are taken from supplier catalogues or hand-measured and should be used as a guide. Minor variation between batches is normal. Stock is sourced from various suppliers, so differences may exist between batches in thread length, markings, appearance or finish.

Product Photos & PDF Data Sheets Represent the product type, not exact size. PDFs are a reference guide only. Specifications may change without notice.

If you see any problems with any of our specifications or you require additional information please contact us.