Header imageFREE Delivery Header imageAustralian OwnedHeader imageSpend DISCOUNTS

M18 x 1.50p Metric Fine Stainless A2-70 G304 1 Piece Dome Nuts DIN 1587

As low as $5.950 /each
The “as low as price” is based on buying the largest pack qty and a cart value over $250
BUY MORE. SAVE MORE.
Price for each item Subtotal % savings
Buy 1 Buy 1 $22.00 each $22.00 -
Buy 2 + Buy 2 - 4 $18.00 each $36.00 18.18%
Buy 5 + Buy 5 - 9 $14.00 each $70.00 22.22%
Buy 10 + Buy 10 - 19 $13.00 each $130.00 7.14%
Buy 20 + Buy 20 - 29 $12.00 each $240.00 7.69%
Buy 30 + Buy 30 - 49 $11.00 each $330.00 8.33%
Buy 50 + Buy 50 - 74 $10.00 each $500.00 9.09%
Buy 75 + Buy 75 - 99 $9.00 each $675.00 10.00%
Buy 100 + Buy 100 - 199 $8.00 each $800.00 11.11%
Buy 200 + Buy 200 + $7.00 each $1,400.00 12.50%

Savings % based on buy qty vs previous buy qty

Show % Savings
SKU: 41DMFS18150

In Stock

- +
Min buy qty is:

Spend discounts will apply once added to Cart

More Information
System of Measurement Metric
Product Dome Acorn 1 Piece Nut
Size M18 (18mm)
Size & Thread Pitch M18 x 1.50p Fine
Thread Pitch 1.50mm
Thread Fine
Thread Direction Right Hand
Corrosion Protection Level Excellent
Class Grade A2-70 G304
Material Stainless Steel
Across Flats (af) 26.16 - 27.00mm
Across Corners (ac) 29.56 - 31.20mm
Dome Head Width (c) 26.00mm
Nut Height Overall (b) 32.00mm
Hex Height (h) 15.00mm
Internal Nut Depth (p) 24.60mm
Spanner Size (af) 27mm
Closest size in imperial <> 5/8" - 3/4"
Standard Made To DIN1587
Brand Bolt and Nut Australia

Dimensional data is a guide only. Tolerance differences exist between brands and batches

M18 (18mm) x 1.50p Metric Extra Fine Dome Nuts are closed-top hex nuts that cover and protect the end of the bolt thread for safety and appearance.

About Dome Nuts

Dome Nuts have a closed, rounded top that covers the end of the bolt thread for safety and appearance. The dome shape protects against snags on exposed thread ends and gives a clean visible finish. Commonly used on balustrading, handrails, school and public furniture, and any place where exposed bolt threads would be unsightly or unsafe.


Not sure what nut you have?
Two ways to identify it - whichever is easier with what is in front of you.
1If you have the nut

Find the spanner that fits it snugly, then measure the hole. Our nut identification chart lists every metric and imperial nut we stock side by side, sorted by spanner size.

Open the nut identification chart ›

2If you have its bolt

The fastest check is the male thread: the right nut spins onto its bolt by hand with no force. Identify the bolt size and pitch first with our bolt and screw guide, and the nut follows.

Open the bolt and screw guide ›


Also known as
Dome Nuts · Acorn Nuts · 1-Piece Dome Nuts · Closed End Nuts · Cap Nuts (Dome)

Frequently Asked Questions

What is a dome / cap nut for?
A nut with a closed, rounded top that covers the end of the bolt thread.

Used wherever the protruding end of a bolt thread is unsightly or unsafe: exposed handrails, balustrading, school furniture, marine fittings, and any place a sharp thread end could snag clothing or skin. Provides full thread engagement like a standard hex nut, plus the cap.

Does it cover the bolt thread completely?
Yes. The dome seals over the end of the bolt so no thread is visible above the nut.

The internal cavity is sized to match the nut height, so the bolt should end approximately flush with the top of the nut's internal thread. If the bolt is too long, the dome will bottom out before the nut is fully seated; if too short, the dome will be hollow but the joint is still secure.

What bolt does this fit?
Any bolt with a matching M18 (18mm) x 1.50mm extra fine thread pitch.

Match diameter and pitch. Choose a bolt length that ends approximately at the top of the nut's thread. This gives a full clamp without bottoming out the cap.

What strength class is this?
Stainless A2-70 G304. Property class 70 (700 MPa minimum tensile).

See the head marking chart and full strength table on our site for the full conversion table.

What standard is this manufactured to?
Manufactured to DIN 1587.

DIN 1587 covers the 1-piece dome nut style; DIN 917 covers the lower-profile cap nut. Both have the same thread and clamp geometry as a standard hex nut.

Where are these typically used?
Balustrading, handrails, school and public furniture, marine and outdoor exposed-thread joints.

Anywhere the visible end of the bolt would be a snag or aesthetic problem. Common in stainless on outdoor and marine fittings, chrome on bathroom and decorative fittings.


Material & Coating

Stainless A2-70 G304 Austenitic stainless steel. Property class 70 designates a minimum tensile strength of 700 MPa with a 0.2 percent proof stress of 450 MPa. Lightly magnetic in cold-worked form, which does not affect corrosion performance.

Grade selection A2-70 G304 is the general-purpose stainless grade for outdoor and most chemical environments. A4-70 G316 contains 2 to 3 percent molybdenum, giving substantially better resistance to chlorides; A4-70 G316 is the preferred grade for marine, coastal and pool environments.

Important Do not pair stainless fasteners with plain or galvanised steel components in wet service. The galvanic potential difference accelerates corrosion of the less-noble metal.

Class Stainless fasteners are classified by property class: A2-35 / A2-50 / A2-70 in G304 stainless, and A4-40 / A4-70 / A4-80 (Bumax 88) in G316. The first digit indicates the alloy and the second is the minimum tensile strength in 100 MPa increments (e.g. A4-70 = 700 MPa). See the head marking chart and full strength table.


Thread Pitch & Terminology

Thread Pitch (Metric) Metric fasteners measure thread pitch as the distance between thread peaks, expressed in millimetres. Metric also branches into three series: coarse (the default; widest tolerance, easiest to tap), fine (a tighter pitch for higher clamp load or thinner walls), and extra fine (the tightest pitch, used for thin-wall tube, precision instruments, and aerospace fittings where vibration loosening must be minimised). Always match the series as well as the size - a metric fine nut will not engage a metric coarse bolt of the same diameter, and an extra fine nut will not engage either. This product has a 1.50mm extra fine pitch, meaning the peaks are 1.50mm apart.

How to Measure

A nut is named after the bolt it fits. An M10 nut fits an M10 bolt - the 10mm is the bolt's diameter, not anything on the nut itself.

The two quick checks are the spanner size across the flats, and the hole, which always measures smaller than the named size (an M10 nut reads about 8.5mm through the hole).

The most reliable test of all: thread it onto a bolt you know. The right nut spins on by hand with no force.


Resources

Technical library PDFs

For full technical data including key product information, range and a CAD drawing, see our Technical PDFs library.

Measurement conversion calculators

Convert between metric and imperial sizes, gauge to mm, decimal to fraction and TPI to pitch with our measurement conversion calculators.

Pricing & Delivery

Includes GST, a Tax Invoice and Free Standard Delivery anywhere in Australia.

Buy with Confidence

15+ years selling online · 25,000+ stock lines · 200 million pieces ex-stock in Brisbane QLD.

Excellent on REVIEWS.ioTrusted by DIYers, tradespeople, builders, manufacturers, government, councils and engineers across Australia · Read reviews

Disclaimer

Technical data Researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately.

Measurements Sizes are taken from supplier catalogues or hand-measured and should be used as a guide. Minor variation between batches is normal. Stock is sourced from various suppliers, so differences may exist between batches in thread length, markings, appearance or finish.

Product Photos & PDF Data Sheets Represent the product type, not exact size. PDFs are a reference guide only. Specifications may change without notice.

If you see any problems with any of our specifications or you require additional information please contact us.

Delivery

Orders UNDER $30

Weigh less than 500grams

Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking

Small orders that fit into the slot of your Letterbox are sent:

FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days

Or

Select a Quicker delivery service

  • $7.00 Parcel Delivery 2-7 business days
  • From $12.00 Express Delivery 1-4 business days
  • From $14.00 StarTrack PREMIUM Express Delivery 1-3 business days

Or

Click & Collect - Warehouse pickup

Unit 9, 93 Rivergate Place, Murarrie, QLD

Place your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 4pm, Monday - Friday

Orders OVER $30

Weigh more than 500grams

Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox

Including Large and Bulky heavy orders are sent:

FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days

Or

Select an Express delivery service

  • From $12.00 Express Delivery 1-4 business days
  • From $14.00 StarTrack PREMIUM Express Delivery 1-3 business days
  •  

Or

Click & Collect - Warehouse pickup

Unit 9, 93 Rivergate Place, Murarrie, QLD

Place your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 4pm, Monday - Friday

All delivery dates are estimated and depend on stock availability, delivery location, service chosen, size of order, time of year, when order was placed e.g long weekends or sale periods. 

Further delivery information can be found on our Delivery page

Supplier Details

MPN 41DMFS18
Have questions about the product?
Loader
scroll icon