FREE Delivery
Australian Owned
Spend DISCOUNTS
All Categories
M5 x 0.80p x 22 Metric Coarse Zinc Silver Plus Nut Large Flange Round Open Smooth Grips 0.5-4.45
| BUY MORE. SAVE MORE. | ||||
|---|---|---|---|---|
| Price for each item | Subtotal | % savings | ||
| Buy 1 | Buy 1 | $5.50 each | $5.50 | - |
| Buy 2 + | Buy 2 - 4 | $4.00 each | $8.00 | 27.27% |
| Buy 5 + | Buy 5 - 9 | $2.42 each | $12.10 | 39.50% |
| Buy 10 + | Buy 10 - 19 | $1.54 each | $15.40 | 36.36% |
| Buy 20 + | Buy 20 - 29 | $1.32 each | $26.40 | 14.29% |
| Buy 30 + | Buy 30 - 49 | $1.10 each | $33.00 | 16.67% |
| Buy 50 + | Buy 50 - 99 | $1.00 each | $50.00 | 9.09% |
| Buy 100 + | Buy 100 - 199 | $0.90 each | $90.00 | 10.00% |
| Buy 200 + | Buy 200 - 499 | $0.80 each | $160.00 | 11.11% |
| Buy 500 + | Buy 500 - 999 | $0.70 each | $350.00 | 12.50% |
| Buy 1000 + | Buy 1000 + | $0.60 each | $600.00 | 14.29% |
|
Savings % based on buy qty vs previous buy qty |
||||
| Show % Savings | ||||
In Stock
Other Sizes in Range
Delivery Information
Orders under $30 (Bulky items sent as parcel for FREE)
- Aust Post UNTRACKED Letter – FREE
- Parcel – From $8
- Express – From $10
- Click and Collect – 2hrs
Orders over $30
- Parcel – FREE
- Express – From $10
- Click and Collect – 2hrs
5% Off
10% Off
15% Off
| System of Measurement | Metric |
|---|---|
| Product | Plus Nut |
| Head Type | Large Flange Head |
| Body Type | Round Open |
| Outside Body | Smooth |
| Pre-Bulbed | NO |
| Industry Size | M5 (0.5-4.45mm grip) |
| Size | M5 (5mm) |
| Size & Thread Pitch | M5 x 0.80p Coarse |
| Thread Pitch | 0.80mm |
| Thread | Coarse |
| Thread Direction | Right Hand |
| Corrosion Protection Level | Moderate |
| Class Grade | Low Tensile Class 4.6 |
| Finish | Zinc Plated |
| Body Material | Steel to BS 970 040A04 |
| Head Diameter (c) | 12.70mm |
| Nut Width (a) | 7.50mm |
| Material Grip Range (g) | 0.50 - 4.45mm |
| Flange Thickness (h) | 1.00mm |
| Nut Height Overall (b) | 22.00mm |
| Recommended Hole Size | 7.50mm |
| Closest size in imperial | 3/16" |
| Brand | Bolt and Nut Australia |
Dimensional data is a guide only. Tolerance differences exist between brands and batches
About Plus Nuts
Plus Nuts have a reinforced ribbed body with an enlarged flange under the head, designed for high pull-out resistance in thicker or harder-to-grip materials. The body deforms into a tight crimp behind the panel during installation. Chosen for chassis brackets, structural fixings, and any application that needs more clamp force than a standard round nutsert can provide.
Recommended use Indoor and dry-environment use only. Common in automotive, machinery and electrical assembly where the bolt is not exposed to weather, condensation or wet service.
Frequently Asked Questions
Pre-drilled into a single-sided hole, then crushed with a nutsert tool so the body deforms and clamps the back face of the panel. The internal thread accepts a bolt afterwards. Used in sheet metal panels, tubular sections, vehicle body panels, signage, electrical enclosures and any thin-walled material that won't take a tapped thread.
BNA stocks a range of nutsert install tools to suit M3 to M12 nutserts - see our Tools range for manual lazy-tong, plier-style, pneumatic and battery-powered options. Always match the nose-piece to the nutsert thread size, and set the stroke or pressure to the grip range printed on the product. Both hole size and panel thickness matter: the hole has to match the body diameter (see the product specifications table above) and the panel thickness has to fall inside the grip range so the body can crush and clamp behind the panel.
The grip range for this nutsert is 0.50 - 4.45mm, which is the panel-thickness window the nutsert will clamp on. A nutsert installed into too-thin a panel won't clamp at all; into too-thick a panel it can't deform enough to reach the back face. If your panel thickness falls between two grip ranges, choose the lower of the two.
Typical metric nutserts use a hole approximately 0.1 to 0.2mm larger than the nutsert body diameter, but always check the manufacturer's hole-size table for the exact dimension. Too small and the nutsert won't seat; too large and it spins in the hole instead of crushing.
Bolt length should engage the full internal thread without bottoming out. If the nutsert is a closed-end style (sealed top), bolt length must be less than the internal cavity depth or the bolt will bottom out before the joint is tight.
See the head marking chart and full strength table on our site for the full conversion table and head markings.
Nutserts are often built to a manufacturer specification rather than a public standard. Material grade and class come from the base steel / stainless / aluminium specification (AISI, ASTM, AS/ISO 898 for the thread).
Pick the material to match the substrate: zinc-plated for indoor / dry, stainless for outdoor / marine / chemical, aluminium for thin sheet aluminium and weight-sensitive assemblies.
Material & Coating
Zinc Electroplated zinc on carbon steel. A thin (5 to 12 micron) bright (clear-passivated) zinc layer applied by electrolysis. Bright silvery finish.
Important NOT suitable for outdoor, wet, marine or treated-timber applications. The thin coating is consumed quickly by rainwater or treated-pine preservatives. For outdoor use, specify hot-dip galvanised.
Class Metric fasteners are classified as class 2, 4.6, 8.8, 10.9, 12.9, 14.9. See the head marking chart and full strength table.
Thread Pitch & Terminology
Thread Pitch (Metric) Metric fasteners measure thread pitch as the distance between thread peaks, expressed in millimetres. Every nutsert we stock is metric coarse - the default series that matches standard metric bolts and machine screws. This product has a 0.80mm coarse pitch, meaning the peaks are 0.80mm apart.
How is the Length of a Nutsert Measured?
Nutsert Length Every nutsert is measured the same way: overall, head included - from the top of the head to the end of the body. The rule holds for every head style we stock, whether it is a large flange, small flange or countersunk head.
Length alone does not pick the right nutsert. The Grips range in the product name (for this product: 0.50 - 4.45mm) states the panel-thickness window the body clamps on - match that to your panel thickness and the body length looks after itself.
Still not sure? See our step-by-step guide on how to install a nutsert.
Resources
For full technical data including key product information, range and a CAD drawing, see our Technical PDFs library.
Convert between metric and imperial sizes, gauge to mm, decimal to fraction and TPI to pitch with our measurement conversion calculators.
Pricing & Delivery
Includes GST, a Tax Invoice and Free Standard Delivery anywhere in Australia.
Buy with Confidence
15+ years selling online · 25,000+ stock lines · 200 million pieces ex-stock in Brisbane QLD.
Excellent on REVIEWS.ioTrusted by DIYers, tradespeople, builders, manufacturers, government, councils and engineers across Australia · Read reviewsDisclaimer
Technical data Researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately.
Measurements Sizes are taken from supplier catalogues or hand-measured and should be used as a guide. Minor variation between batches is normal. Stock is sourced from various suppliers, so differences may exist between batches in thread length, markings, appearance or finish.
Product Photos & PDF Data Sheets Represent the product type, not exact size. PDFs are a reference guide only. Specifications may change without notice.
If you see any problems with any of our specifications or you require additional information please contact us.
Delivery
Weigh less than 500grams
Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking
Small orders that fit into the slot of your Letterbox are sent:
FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days
Or
Select a Quicker delivery service
- $7.00 Parcel Delivery 2-7 business days
- From $12.00 Express Delivery 1-4 business days
- From $14.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 4pm, Monday - Friday
Weigh more than 500grams
Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox
Including Large and Bulky heavy orders are sent:
FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days
Or
Select an Express delivery service
- From $12.00 Express Delivery 1-4 business days
- From $14.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 4pm, Monday - Friday
Further delivery information can be found on our Delivery page
Supplier Details
| MPN | 43PN5 |
