FREE Delivery
No MINIMUM Spend
Spend DISCOUNTS
M12 x 150mm Galvanised Hex Flange (16mm AF) Xbolt Screwbolt Anchors
$2.210
In stock
SKU
65SB12150G
The “as low as price” is based on buying the largest pack qty and a cart value over $250
| BUY MORE. SAVE MORE. | ||||
|---|---|---|---|---|
| Price for each item | Subtotal | % savings | ||
| Buy 1 | Buy 1 | $15.00 each | $15.00 | - |
| Buy 2 + | Buy 2 - 4 | $9.50 each | $19.00 | 36.67% |
| Buy 5 + | Buy 5 - 9 | $6.20 each | $31.00 | 34.74% |
| Buy 10 + | Buy 10 - 19 | $4.90 each | $49.00 | 20.97% |
| Buy 20 + | Buy 20 - 29 | $4.60 each | $92.00 | 6.12% |
| Buy 30 + | Buy 30 - 49 | $4.20 each | $126.00 | 8.70% |
| Buy 50 + | Buy 50 - 74 | $3.24 each | $162.00 | 22.86% |
| Buy 75 + | Buy 75 - 99 | $3.00 each | $225.00 | 7.41% |
| Buy 100 + | Buy 100 - 199 | $2.95 each | $295.00 | 1.67% |
| Buy 200 + | Buy 200 - 499 | $2.90 each | $580.00 | 1.69% |
| Buy 500 + | Buy 500 - 999 | $2.80 each | $1,400.00 | 3.45% |
| Buy 1000 + | Buy 1000 + | $2.60 each | $2,600.00 | 7.14% |
|
Savings % based on buy qty vs previous buy qty |
||||
| Show % Savings | ||||
Buy 50 for Suppliers Pack Size
This is the pack size qty from our preferred supplier. You do not have to buy this qty but rounding your ordering qty up to the pack size can be better value and speed up dispatch and delivery times. The stock may also be sent in the suppliers original packaging which can have additional information like batch numbers and / or expiry dates for traceability. If we ship your order directly from our supplier the pack size may vary. Orders under $40 or weigh less than 500grams may be repacked for postage. Pack sizes vary by supplier and subject to change
SKU: 65SB12150G
In Stock
Select Add-Ons
12mm x 210mm x 50mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***
$15.00
$15.00($15.00/ea)
12mm x 260mm x 200mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***
$21.00
$21.00($21.00/ea)
12mm x 210mm x 50mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***
$15.00
$15.00($15.00/ea)
12mm x 260mm x 200mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***
$21.00
$21.00($21.00/ea)
12mm x 210mm x 50mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***
$15.00
$15.00($15.00/ea)
12mm x 260mm x 200mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***
$21.00
$21.00($21.00/ea)
Total amount =
$14.25
Your Spend Discount of 5% has been applied
Spend a further $85.00 to get 10% off your Total Order
SKU: 65SB12150G
In Stock
Other Sizes in Range
Free Delivery
Delivery Information
Orders under $30 (Bulky items sent as parcel for FREE)
- Aust Post UNTRACKED Letter – FREE
- Parcel – From $8
- Express – From $10
- Click and Collect – 2hrs
Orders over $30
- Parcel – FREE
- Express – From $10
- Click and Collect – 2hrs
Email Quote
To create a quote, add all the items to your shopping cart, go to shopping cart and click “Email as a Quote”.
Spend Discount
Upto $99
5% Off
5% Off
$100 to $249
10% Off
10% Off
Over $250
15% Off
15% Off
Matching Parts
- Product Screw Anchor / Screw Bolt / XBolt
- Head Type Hex Flange Head
- Size M12 (12mm)
- Anchor Length (l) 150mm
- Corrosion Protection Level Excellent
- Internal or External External
- Class Grade Low Tensile Class 5.8
- Material Carbon Steel
- Finish Galvanised
- Thread Length (t) 100mm
- Flange Diameter (f) 26.10mm
- Head Height (h) 11.20 - 11.40mm
- Max Fast Thickness (g) 95mm
- Spanner Size (af) 16mm
- Drive Type Hex
- Drill Hole Size 12mm
- Minimum Spacing 60mm
- Minimum Edge Distance 60mm
- Minimum Embedment Depth 55mm
- Minimum Hole Dia. on Fixture 15mm
- Closest size in imperial 1/2"
- Brand Hobson Engineering
Dimensional data is a guide only. Tolerance differences exist between brands and batches
Description
- Hex Flange Xbolt Screwbolt Anchors are an one-piece unit featuring a finished hex head formed with an integral washer. Suitable for any trade, carpenter, formworker, tie down applications, racking installers and construction. Can be used in concrete, lightweight concrete, hollow core concrete, block, brick and stone.
- Features / Benefits: Ideal general purpose anchor, even on temporary jobs as it’s completely removable. They are fast to install with immediate high strength loading with no expansion forces and are vibration resistant. Can be installed closer to the edge than traditional mechanical anchors and at a shallower embedment reducing the chance of striking reinforcing bars or embedded cables. Because of the design of the cutting thread, during installation it does not expand or put pressure on the surrounding substrates
- Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years in construction, roofing, steel buildings, trailers, bridges, fencing, power poles, marina’s, are just a few examples. Recently we have seen a lot of new coatings developed, terms like class 3, class 4, B8, climseal, mechanical galvanised and ruspert which are all variations of the original galvanising
- Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Delivery
Orders UNDER $30
Weigh less than 500grams
Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking
Small orders that fit into the slot of your Letterbox are sent:
FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days
Or
Select a Quicker delivery service
- $7.00 Parcel Delivery 2-7 business days
- From $10.00 Express Delivery 1-4 business days
- From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday
Orders OVER $30
Weigh more than 500grams
Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox
Including Large and Bulky heavy orders are sent:
FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days
Or
Select an Express delivery service
- From $10.00 Express Delivery 1-4 business days
- From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday
All delivery dates are estimated and depend on stock availability, delivery location, service chosen, size of order, time of year, when order was placed e.g long weekends or sale periods.
Further delivery information can be found on our Delivery page on this website
Further delivery information can be found on our Delivery page on this website
Supplier Details
| MPN | MXHMSGM120150, MXH115, ASBMG121502, W49350, SXB12150G, SBGH12150 |
| UPC | 9314818369671, 9337357118364, 662403906848, 9312862037157 |
