Conduit Saddles

Conduit saddles are half-round zinc-plated bracket strips that clip electrical conduit to a framing substrate. The saddle wraps the bottom of the conduit; bolt-through holes at each end clamp the saddle to the substrate, securing the conduit in place.
Also known as: Conduit Clip, Conduit Strap, Electrical Saddle, Cable Conduit Saddle.
Zinc-plated half conduit saddles in 16mm and 20mm conduit sizes - the two standard Australian electrical conduit OD. Each saddle has bolt-through holes for substrate mounting.
GRADES AND MATERIALS
Zinc-plated steel (not stainless): the conduit saddle is the one exception to the stainless theme in the Marine & Hardware category. Zinc plating is the electrical-trade standard for indoor, roof-space and switchboard conduit runs. NOT for direct marine, wet-area or outdoor exposed installation. For stainless equivalents, contact us.
INSTALLATION AND USE
Position the conduit on the substrate where it should run. Place the saddle over the conduit and mark the bolt-through holes on the substrate. Drill, mount with screws or bolts matching the substrate (timber screws for timber stud, masonry screws for brick, self-drilling for steel section). Conduit-to-saddle is a clip fit; saddle-to-substrate is the secured connection.
A NOTE ON GALLING
Stainless threads can gall under tension - apply a thin film of nickel-based anti-seize from the Anti-Seize range to the male thread before assembly. Tighten slowly, never with an impact driver.
SIZE AND WLL
Match the saddle to the conduit OD: 16mm saddle for 16mm conduit, 20mm for 20mm. Mixing sizes results in either a loose conduit (16mm in 20mm saddle) or a forced fit (20mm in 16mm saddle, won't seat).
WHY AUSTRALIA TRUSTS BOLT & NUT
With 15+ years selling fasteners online from Brisbane, we hold over 25,000 stock lines and 200 million pieces - 98.75% of online orders placed before 1pm leave same day. Save more as you buy more - we offer up to 13 price breaks plus 3 spend-tier discounts. Read our customer reviews or get in touch if you need help picking the right conduit saddle.
Zinc-plated half conduit saddles - clip electrical conduit to substrate framing in dry workshop and roof-space installations. 16mm and 20mm conduit diameters. NOT marine-grade.
TECHNICAL RESOURCES
Per-SKU WLL, dimensions and stainless grade published on every product page. Overview chart: Technical PDF's Library.
