Rivets

Rivets Assortment Kit

The Rivets kit holds blind (pop) rivets across the most-used dome, countersunk and large-flange heads - the kit for sheet metal joining without rear access.

WHAT IS IN THE KIT

Typical 7-line rivet kits cover 3.2mm and 4.0mm body diameter, grip ranges 4 to 12mm, in aluminium or stainless finish.

WHEN TO PICK THIS KIT

Pick a Rivets kit for ductwork, signage, light sheet fabrication and any joint where you can only get to one side. Hand riveter compatible.

RESTOCKING SINGLE SIZES

Bulk-pack rivets, sealed rivets and the matching hand riveter are stocked at our Rivets range, where single sizes are stocked in bulk packs from 25 to 1000+ pieces.

FREQUENTLY ASKED QUESTIONS

What sizes are in a Rivets Assortment Kit?

Typical 7-line rivet kits cover 3.2mm and 4.0mm body diameter, grip ranges 4 to 12mm, in aluminium or stainless finish. Check the kit description on the specific product page for the exact piece count and size list - different kits in this category cover different size breadth at different piece counts.

What finish and class are the Rivets in the kit?

Most Rivets kits ship with the standard general-assembly finish and class noted in the kit description. For outdoor, wet or coastal use, look for the stainless variant where available. For structural and load-rated work, confirm the Class rating on the kit before installing. The full finish and class options for the individual items are listed on the Rivets range page.

Can I buy single sizes from a Rivets kit?

Yes. Every kit cross-references the matching main category for loose-stock purchase of single sizes. When one size depletes ahead of the others, restock from our Rivets range where individual sizes are stocked in bulk packs from 25 to 1000+ pieces.

What grip range is covered by the rivets in the kit?

Standard Rivets Assortment Kits cover 4mm to 12mm grip range across the included body diameters. For thicker stack-ups (12mm+) use long-grip rivets from the loose-stock Rivets range. Always match the rivet grip range to the total panel thickness being joined.

Are sealed (waterproof) rivets included?

Standard kits are open-end rivets - the mandrel pulls through and breaks at the head, leaving a small open hole at the rear. Sealed rivets (closed-end) have a domed sealing tip that prevents water ingress. Sealed rivets are typically a separate specialty kit or sold loose in the Rivets range.

What jobs is the Rivets Assortment Kit best for?

Pick a Rivets kit for ductwork, signage, light sheet fabrication and any joint where you can only get to one side. Hand riveter compatible.

How do I identify which size in the kit I need?

Match the rivet against the compartment labels on the kit case. Blind rivets are sized by body diameter and grip range (the total material thickness they clamp). See the how to identify and measure blind rivets guide for the full method.

Are Rivets kits stocked in Australia?

Yes. The Rivets kit range is stocked in our Brisbane warehouse and ships same business day on orders placed before 1pm AEST. 98.75% of orders ship same day from over 25,000 stock lines.

WHY AUSTRALIA TRUSTS BOLT & NUT

98.75% of orders ship the same business day from over 25,000 stock lines in our Brisbane warehouse. Read customer reviews on our reviews page or contact us for help selecting between kit sizes or working out the matched loose-stock restock.