M12 x 80mm Galvanised Wedge Anchor Through Bolt

$7.00

In stock

SKU

65TB1280G

The “as low as price” is based on buying the largest pack qty and a cart value over $250

BUY MORE. SAVE MORE.
	Price for each item	Subtotal	% savings
Buy 1	Buy 1	$7.00 each	$7.00	-
Buy 2 +	Buy 2 - 4	$5.00 each	$10.00	28.57%
Buy 5 +	Buy 5 - 9	$4.00 each	$20.00	20.00%
Buy 10 +	Buy 10 - 19	$2.40 each	$24.00	40.00%
Buy 20 +	Buy 20 - 29	$2.35 each	$47.00	2.08%
Buy 30 +	Buy 30 - 49	$2.00 each	$60.00	14.89%
Buy 50 +	Buy 50 - 74	$1.56 each	$78.00	22.00%
Buy 75 +	Buy 75 - 99	$1.39 each	$104.25	10.90%
Buy 100 +	Buy 100 - 199	$1.21 each	$121.00	12.95%
Buy 200 +	Buy 200 - 499	$1.15 each	$230.00	4.96%
Buy 500 +	Buy 500 - 999	$1.07 each	$535.00	6.96%
Buy 1000 +	Buy 1000 +	$0.99 each	$990.00	7.48%
Savings % based on buy qty vs previous buy qty
Show % Savings

SKU: 65TB1280G

In Stock

Select Add-Ons

12mm x 210mm x 50mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***

$15.00

12mm x 260mm x 200mm SDS Plus 2 Head German Masonry Drill Bit ***Bundle Buy***

$21.00

Total amount =

Please select any of the option above and then proceed.

SKU: 65TB1280G

In Stock

Other Sizes in Range

Free Delivery

Email Quote

To create a quote, add all the items to your shopping cart, go to shopping cart and click “Email as a Quote”.

Save to Wishlist

Spend Discount

Upto $99
5% Off

$100 to $249
10% Off

Over $250
15% Off

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Matching Parts

Technical Specifications

Specs - Wedge Anchor Galvanised.pdf Hobson Clawbolt Wedge Anchors.pdf Hobson Conxtruct Catalogue.pdf Hobson Conxtruct Product Guide.pdf Hobson Article Concrete v Anchoring.pdf

Product Wedge Anchor / Claw Bolt / Through Bolt
Size M12 (12mm)
Size & Thread Pitch M12 x 1.75p Coarse
Anchor Length (l) 80mm
Bolt Diameter x Pitch M12 x 1.75p Coarse
Corrosion Protection Level Excellent
Internal or External External
Class Grade Low Tensile Class 5.8
Material Carbon Steel
Finish Galvanised
Spanner Size (af) 19mm
Drive Type Hex
Drill Hole Size 12mm
Tightening Torque (Nm) 50Nm
Minimum Spacing 75mm
Min Base Material Thick 130mm
Minimum Edge Distance 100mm
Minimum Embedment Depth 70mm
Minimum Hole Dia. on Fixture 15mm
Standard Made To ISO4032, AS1214
Brand Hobson Engineering
Alternative Brands Brighton Best | Bremick Fasteners

Dimensional data is a guide only. Tolerance differences exist between brands and batches

Description

Wedge Anchor Through Bolts are one (1) piece heavy-duty pre-assembled torque controlled mechanical expansion anchor. When tightened the anchor draws the tapered end of the bolt into the expander clip forcing it out and creating expansion forces against the wall of the hole. Designed to be used in concrete, solid masonry and stone.
Features / Benefits: Suitable for overhead applications and is removable. Ideal for fastening columns and beams. Perfect for quickly fixing steel and timber structures to a range of base materials: Concrete, Brick, Block, Marble, Stone. Suitable for both residential and commercial construction
Material / Coating: Galvanised is a dull greyish colour and can be a little rough in appearance and is mainly used outdoors because of its superior corrosion resistance and proven longevity. Also known as HDG, it is one of the best coatings for protection against rust. Galvanised fasteners have been used across many industries in Australia for over 150 years in construction, roofing, steel buildings, trailers, bridges, fencing, power poles, marina’s, are just a few examples. Recently we have seen a lot of new coatings developed, terms like class 3, class 4, B8, climseal, mechanical galvanised and ruspert which are all variations of the original galvanising
Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
Fastener length: is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you do see a problem please contact us
Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
PDF data sheet: The attached PDF data sheet has additional technical specifications and "how to" diagrams which we find to be helpful as reference material. Although provided by one of our suppliers, the brand supplied may be different. If brand is critical, please refer to the technical specification tab to see our supplier list or contact us prior to ordering. As we are always updating and adding new lines to our site the data sheet may not include every item we stock or have items that are currently not on our site. If there is something you need and you can’t find it, please contact us for price and availability
Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia

Delivery

Orders UNDER $30

Weigh less than 500grams

Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking

Small orders that fit into the slot of your Letterbox are sent:

FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days

Select a Quicker delivery service

$7.00 Parcel Delivery 2-7 business days
From $10.00 Express Delivery 1-4 business days
From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days

Click & Collect - Warehouse pickup

Unit 9, 93 Rivergate Place, Murarrie, QLD

Place your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday

Orders OVER $30

Weigh more than 500grams

Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox

Including Large and Bulky heavy orders are sent:

FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days

Select an Express delivery service

From $10.00 Express Delivery 1-4 business days
From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days

Click & Collect - Warehouse pickup

Unit 9, 93 Rivergate Place, Murarrie, QLD

Place your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday

All delivery dates are estimated and depend on stock availability, delivery location, service chosen, size of order, time of year, when order was placed e.g long weekends or sale periods.

Further delivery information can be found on our Delivery page on this website

Help