Header imageFREE Delivery Header imageNo MINIMUM SpendHeader imageSpend DISCOUNTS

M16 x 2.00p Metric Coarse Zinc Hex Bolts Class 10.9 High Tensile AS 1110.1

Select an option below to view price

In stock
SKU
51H16109_configurable
The “as low as price” is based on buying the largest pack qty and a cart value over $250

In Stock

Sold Out

- +

Spend discounts will apply once added to Cart

  • System of Measurement Metric
  • Product Hex Head Bolt
  • Head Type Hex Head
  • Size M16 (16mm)
  • Size & Thread Pitch M16 x 2.00p Coarse
  • Thread Pitch 2.00mm
  • Thread Coarse
  • Thread Direction Right Hand
  • Corrosion Protection Level Moderate
  • Class Grade High Tensile Class 10.9
  • Material Carbon Steel
  • Finish Zinc Plated
  • Length (l) Select from the dropdown
  • Thread Length (t) Choose your length to view
  • Product Diameter (d) 15.73 - 16.00mm
  • Across Flats (af) 23.67 - 24.00mm
  • Across Corners (ac) 26.75 - 27.70mm
  • Head Height (h) 9.82 - 10.18mm
  • Spanner Size (af) 24mm
  • Drive Type Hex
  • Ultimate Tensile Load (kN) 163.30 min
  • Proof Load (kN) 130.30 min
  • Shear Strength (kN) Shank 131 | Thread 94 min
  • Tensile Strength (mpa) 1040 min
  • Closest size in imperial 5/8"
  • Standard Made To AS1110.1
  • Brand Hobson Engineering
  • Alternative Brands Brighton Best | Bremick Fasteners

Dimensional data is a guide only. Tolerance differences exist between brands and batches

Description

  • Hex Bolts has a hexagon head, part thread and part shank and is used to fasten material. Used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole. A nut and bolt combination compresses everything together. To tighten the nut requires a socket and wrench or a spanner, If, while tightening the nut, the bolt turns with it, a second spanner or wrench is required to hold-on to the bolt while the nut is tightened. If thread length is critical there is a cross over where a hex bolt could be fully threaded. This is due to a gradual change in the fastener industry due to wholesalers wanting to reduce their stock holdings, now they only carry the shorter lengths as fully threaded. Therefore, if thread length is critical, always check our specifications or contact us prior to ordering
  • Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically
  • Grade v Class Difference: Metric fastenings are referred to as classes and imperial as grade. Both generally have head markings to determine grade and class. These bolts will have 10.9 stamped on them indicating 10.9 and are stronger then 8.8 high tensile. Imperial have either 3 lines for grade 5 and 5 lines for grade 8, both are regarded as high tensile.
  • Material Strength: Bolts are made to class strength 10.9. They have a min yield strength of 940 and a min tensile strength is 1040 Mpa
  • Thread Pitch (Metric): Pitch means the distance between the peaks of two threads along a screw, bolt, or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
  • Fastener Length: Is generally measured from the point where the surface of the material will be when the fastener is installed to the end of the fastener. Thus, fasteners with heads that sit above the surface are measured from under the head to the end of the fastener, while fasteners that sit flush with the surface are measured from the top of the head to the end of the fastener
  • A guide to determining the approx. thread length, please note this is only a guide: upto and including 125mm = 2 x diameter + 6mm, over 125mm up to and including 200mm = 2 x diameter + 12mm, over 200mm = 2 x diameter + 25mm
  • Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
  • Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
  • Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
  • Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
  • Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
  • Buy with confidence: ⇒ 13+ years experience selling online, > 24,000 stock lines, > 130 million pieces ex stock in Brisbane QLD
  • Prices: Include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia

Delivery

Orders UNDER $30

Weigh less than 500grams

Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking

Small orders that fit into the slot of your Letterbox are sent:

FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days

Or

Select a Quicker delivery service

  • $7.00 Parcel Delivery 2-7 business days
  • From $10.00 Express Delivery 1-4 business days
  • From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days

Or

Click & Collect - Warehouse pickup

Unit 9, 93 Rivergate Place, Murarrie, QLD

Place your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday

Orders OVER $30

Weigh more than 500grams

Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox

Including Large and Bulky heavy orders are sent:

FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days

Or

Select an Express delivery service

  • From $10.00 Express Delivery 1-4 business days
  • From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
  •  

Or

Click & Collect - Warehouse pickup

Unit 9, 93 Rivergate Place, Murarrie, QLD

Place your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday

All delivery dates are estimated and depend on stock availability, delivery location, service chosen, size of order, time of year, when order was placed e.g long weekends or sale periods. 

Further delivery information can be found on our Delivery page on this website

Supplier Details

MPN BS10ZCM160025, BH10ZCM160025, B09MZ160252, BS10ZCM160030, BH10ZCM160030, 466154, B09MZ160302, BS10ZCM160035, BH10ZCM160035, 466155, B09MZ160352, BS10ZCM160040, BH10ZCM160040, 466157, B09MZ160402, BS10ZCM160045, BH10ZCM160045, 466158, B09MZ160452, BH10ZCM160050, B09MZ160502, BH10ZCM160060, 466560, B09MZ160602, BH10ZCM160065, 466164, B09MZ160652, BH10ZCM160070, 466166, B09MZ160702, BH10ZCM160075, 466169, B09MZ160752, BH10ZCM160080, 466172, B09MZ160802, BH10ZCM160090, 466175, B09MZ160902, BH10ZCM160100, 466178, B09MZ161002, BH10ZCM160110, 466181, B09MZ161102, BH10ZCM160120, 466184, B09MZ161202, BH10ZCM160130, 466187, B09MZ161302, BH10ZCM160140, 466190, B09MZ161402, BH10ZCM160150, 466193, B09MZ161502
UPC 9350629154723, 9350629154723, 9314818654609, 9350629154747, 9350629154761, 9350629154761, 9314818654623, 9350629154785, 9314818650571, 9314818654630, 9314818650595, 9314818430555, 9314818650601, 9314818650618, 9314818650625, 9314818650632, 9314818650649, 9314818650656, 9314818650663, 9314818650670, 9314818650687, 9314818650694
Have questions about the product?
Loader
scroll icon