FREE Delivery
No MINIMUM Spend
Spend DISCOUNTS
My Cart
You have no items in your shopping cart.
M12 x 1.75p Metric Coarse Stainless A4-70 G316 Hex Standard Nuts DIN 934
$0.229
In stock
SKU
41SM12M
The “as low as price” is based on buying the largest pack qty and a cart value over $250
| BUY MORE. SAVE MORE. | ||||
|---|---|---|---|---|
| Price for each item | Subtotal | % savings | ||
| Buy 1 | Buy 1 | $5.80 each | $5.80 | - |
| Buy 2 + | Buy 2 - 4 | $3.50 each | $7.00 | 39.66% |
| Buy 5 + | Buy 5 - 9 | $1.60 each | $8.00 | 54.29% |
| Buy 10 + | Buy 10 - 19 | $1.00 each | $10.00 | 37.50% |
| Buy 20 + | Buy 20 - 29 | $0.75 each | $15.00 | 25.00% |
| Buy 30 + | Buy 30 - 49 | $0.60 each | $18.00 | 20.00% |
| Buy 50 + | Buy 50 - 74 | $0.55 each | $27.50 | 8.33% |
| Buy 75 + | Buy 75 - 99 | $0.50 each | $37.50 | 9.09% |
| Buy 100 + | Buy 100 - 199 | $0.39 each | $39.00 | 22.00% |
| Buy 200 + | Buy 200 - 499 | $0.36 each | $72.00 | 7.69% |
| Buy 500 + | Buy 500 - 999 | $0.32 each | $160.00 | 11.11% |
| Buy 1000 + | Buy 1000 - 1999 | $0.29 each | $290.00 | 9.38% |
| Buy 2000 + | Buy 2000 + | $0.27 each | $540.00 | 6.90% |
|
Savings % based on buy qty vs previous buy qty |
||||
| Show % Savings | ||||
Buy 100 for Suppliers Pack Size
This is the pack size qty from our preferred supplier. You do not have to buy this qty but rounding your ordering qty up to the pack size can be better value and speed up dispatch and delivery times. The stock may also be sent in the suppliers original packaging which can have additional information like batch numbers and / or expiry dates for traceability. If we ship your order directly from our supplier the pack size may vary. Orders under $40 or weigh less than 500grams may be repacked for postage. Pack sizes vary by supplier and subject to change
SKU: 41SM12M
In Stock
Other Sizes in Range
Free Delivery
Delivery Information
Orders under $30 (Bulky items sent as parcel for FREE)
- Aust Post UNTRACKED Letter – FREE
- Parcel – From $8
- Express – From $10
- Click and Collect – 2hrs
Orders over $30
- Parcel – FREE
- Express – From $10
- Click and Collect – 2hrs
Email Quote
To create a quote, add all the items to your shopping cart, go to shopping cart and click “Email as a Quote”.
Spend Discount
Upto $99
5% Off
5% Off
$100 to $249
10% Off
10% Off
Over $250
15% Off
15% Off
Order within the next for next dispatch Today AEST
Matching Parts
- System of Measurement Metric
- Product Standard Full Nut
- Size M12 (12mm)
- Size & Thread Pitch M12 x 1.75p Coarse
- Thread Pitch 1.75mm
- Thread Coarse
- Thread Direction Right Hand
- Corrosion Protection Level Ultimate
- Class Grade A4-70 G316
- Material Stainless Steel
- Across Flats (af) 18.67 - 19.00mm
- Across Corners (ac) 21.10 - 21.94mm
- Nut Height Overall (b) 9.64 - 10.00mm
- Spanner Size (af) 19mm
- Closest size in imperial 1/2"
- Standard Made To DIN934
- Brand Hobson Engineering
- Alternative Brands Brighton Best | Inox World
Dimensional data is a guide only. Tolerance differences exist between brands and batches
Description
- Hex standard full nuts are the most common nuts available and are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has external screw threads. Hex is short for hexagon, which means they have six sides
- Also known as: Hexagonal Full Nuts, Standard Hex Nuts, Finished Hex Nuts
- Material / Coating: Marine Grade Stainless Steel A4-70 G316 is the ultimate corrosion resistance fastener. Designed to be used in all conditions. It is the best material to use in marine, coastal, chemical and food environments. Stainless steels are largely non-magnetic, but it is not uncommon for some stainless steel fasteners to show a small degree of magnetism. This is partly due to the manufacturing process. Marine Grade Stainless Steel A4-70 G316 can be easily identified by the following markings: A4, A4-70, A4-80, 316 or G316. Small sized washers are generally not stamped
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Galling: can occur when excessive pressure is used to tighten a nut onto a thread, common with stainless fasteners but can also be an issue with other materials. Fasteners with damaged or fine threads are particularly prone to galling.
Some suggestions to help prevent thread galling:
Tightening the nut more slowly without excessive pressure, will frequently reduce or sometimes solve completely, the problem. As the installation RPM speed increases, the heat generated with friction during tightening escalates the chances of thread galling.
Reduce the friction by applying a suitable lubricant to the thread frequently eliminates thread galling. Typical lubricants are chloride-paraffine, molykoat lacquer, molybdenum disulphide, high pressure oil, graphite, mica, or talc, some assemblies where there is extreme pressure, corrosion resistant grease or waxes may also be effective - Thread Pitch (Metric): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.50mm means that the distance between one thread and the next is 1.50mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
