M12 (1/2") x 27mm Zinc Flat Washers High Tensile ASTM F436M
BUY MORE. SAVE MORE. | ||||
---|---|---|---|---|
Price for each item | Subtotal | % savings | ||
Buy 1 | Buy 1 | $5.50 each | $5.50 | - |
Buy 2 + | Buy 2 - 4 | $2.90 each | $5.80 | 47.27% |
Buy 5 + | Buy 5 - 9 | $1.20 each | $6.00 | 58.62% |
Buy 10 + | Buy 10 - 19 | $0.80 each | $8.00 | 33.33% |
Buy 20 + | Buy 20 - 29 | $0.50 each | $10.00 | 37.50% |
Buy 30 + | Buy 30 - 49 | $0.40 each | $12.00 | 20.00% |
Buy 50 + | Buy 50 - 74 | $0.30 each | $15.00 | 25.00% |
Buy 75 + | Buy 75 - 99 | $0.24 each | $18.00 | 20.00% |
Buy 100 + | Buy 100 - 199 | $0.21 each | $21.00 | 12.50% |
Buy 200 + | Buy 200 - 499 | $0.18 each | $36.00 | 14.29% |
Buy 500 + | Buy 500 - 999 | $0.17 each | $85.00 | 5.56% |
Buy 1000 + | Buy 1000 - 1999 | $0.15 each | $150.00 | 11.76% |
Buy 2000 + | Buy 2000 - 4999 | $0.14 each | $280.00 | 6.67% |
Buy 5000 + | Buy 5000 + | $0.13 each | $650.00 | 7.14% |
Savings % based on buy qty vs previous buy qty |
||||
Show % Savings |
Buy 100 for Suppliers Pack Size
This is the pack size qty from our preferred supplier. You do not have to buy this qty but rounding your ordering qty up to the pack size can be better value and speed up dispatch and delivery times. The stock may also be sent in the suppliers original packaging which can have additional information like batch numbers and / or expiry dates for traceability. If we ship your order directly from our supplier the pack size may vary. Orders under $40 or weigh less than 500grams may be repacked for postage. Pack sizes vary by supplier and subject to change
In Stock
Other Sizes in Range
Delivery Information
Orders under $30 (Bulky items sent as parcel for FREE)
- Aust Post UNTRACKED Letter – FREE
- Parcel – From $8
- Express – From $10
- Click and Collect – 2hrs
Orders over $30
- Parcel – FREE
- Express – From $10
- Click and Collect – 2hrs
5% Off
10% Off
15% Off

- System of Measurement Metric
- Product Round High Tensile Washer
- Industry Size M12 x 27
- Size M12 (12mm)
- To Suit Fastener Size M12 | 1/2"
- Corrosion Protection Level Moderate
- Class Grade High Tensile Class 8.8
- Material High Tensile Steel
- Finish Zinc Plated
- Inside Dimension (id) 14.00 - 14.40mm
- Outside Dimension (od) 26.00 - 27.50mm
- Thickness (t) 3.00 - 3.80mm
- Dimensional Data Provided as a guide, subject to change
- Standard Made To ASTM F436M
- Brand Hobson Engineering
- Alternative Brands Brighton Best | Bremick Fasteners
Dimensional data is a guide only. Tolerance differences exist between brands and batches
Description
- High Tensile Washers are used to increase the bearing surface of a nut or fastener's head thus spreading the clamping force over a larger area. Commonly used with high tensile bolts and are easily identifed by markings on the face of the washer. The washer also ensures a smooth base for the nut to press against
- High Tensile Washers specifications: High tensile washers do not have an Australian or International standard therefore tolerances, sizing, supplier markings (if applicable) and material finish can be vastly different between batches and suppliers, use the measurements in this listing as a guide only and if they are critical please contact us
- Understanding and measuring washer sizing: Washer sizes can be a little confusing so we will do our best to try to make it a little easier to understand. When searching for a washer, firstly, let's say you have a M6 bolt and you want a matching washer, look for washers with M6 at the beginning of the description (you can speed this up by using our "shop by" filters). If you already have a washer and you are trying to match it, measure the inside, then look for a size slightly smaller that your measurement. For example the inside measurement of the washer you measured is approx 6.50mm, you need to look for a M6 washer. If the washer measured 17.25mm internally then you need a M16 Washer. Remember washers are not precision fasteners and variations in sizing do exist and all measurements on our site should only be used as a guide
- Are Metric & Imperial Washers Interchangeable?: In most cases they are which is why we have added metric sizing to the imperial range and imperial sizing to the metric range. If you are still unsure or if the washer dimensions are critical click on the washer you are interested in and view the technical specifications table before ordering
- Material / Coating: Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally as it only offers an average level of protection against corrosion. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our either our Stainless steel or galvanised range
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and where possible to the relevant standard, however they should only be used as a guide. If you have an exact requirement or you see a problem with our specifications please contact us directly
- Dimensions: Our stock is sourced from various suppliers, differences can exist such as the inside dimension, outside diameter, thickness, visible stamped markings, appearance and actual finish
- Photos: represent the product, not the size. Our title has industry sizing but if additional information is required refer to the CAD drawing, Specifications Table or Technical Specifications PDF
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Data and Technical Data Sheets: provided by ©Bolt &Nut Australia Pty Ltd are to be used as a reference guide only
- Note: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, ©Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 11+ years experience selling online, > 20,000 stock lines, > 100 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Delivery
Weigh less than 500grams
Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking
Small orders that fit into the slot of your Letterbox are sent:
FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days
Or
Select a Quicker delivery service
- $7.00 Parcel Delivery 2-7 business days
- From $10.00 Express Delivery 1-4 business days
- From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday
Weigh more than 500grams
Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox
Including Large and Bulky heavy orders are sent:
FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days
Or
Select an Express delivery service
- From $10.00 Express Delivery 1-4 business days
- From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday
Further delivery information can be found on our Delivery page on this website
Supplier Details
MPN | WR43ZM12, W80MZ1200P2, 373021 |
UPC | 9314818522625, 9337357395031, 662403076459 |