M16 x 1.50p Metric Fine Stainless A2-70 G304 Hex Thin Lock Nuts DIN 439
$8.00
In stock
SKU
41LMFS16150
The “as low as price” is based on buying the largest pack qty and a cart value over $250
| BUY MORE. SAVE MORE. | ||||
|---|---|---|---|---|
| Price for each item | Subtotal | % savings | ||
| Buy 1 | Buy 1 | $8.00 each | $8.00 | - |
| Buy 2 + | Buy 2 - 4 | $6.50 each | $13.00 | 18.75% |
| Buy 5 + | Buy 5 - 9 | $3.80 each | $19.00 | 41.54% |
| Buy 10 + | Buy 10 - 19 | $3.40 each | $34.00 | 10.53% |
| Buy 20 + | Buy 20 - 29 | $2.50 each | $50.00 | 26.47% |
| Buy 30 + | Buy 30 - 49 | $2.30 each | $69.00 | 8.00% |
| Buy 50 + | Buy 50 - 74 | $2.10 each | $105.00 | 8.70% |
| Buy 75 + | Buy 75 - 99 | $1.90 each | $142.50 | 9.52% |
| Buy 100 + | Buy 100 - 199 | $1.70 each | $170.00 | 10.53% |
| Buy 200 + | Buy 200 + | $1.60 each | $320.00 | 5.88% |
|
Savings % based on buy qty vs previous buy qty |
||||
| Show % Savings | ||||
Free Delivery
Email Quote
To create a quote, add all the items to your shopping cart, go to shopping cart and click “Email as a Quote”.
| Up to $99 | 5% |
| Between $100 and $249 | 10% |
| Over $250 | 15% |
- System of Measurement Metric
- Product Thin Lock Nut
- Size M16 (16mm)
- Size & Thread Pitch M16 x 1.50p Fine
- Thread Pitch 1.50mm
- Thread Direction Right Hand
- Thread Type Metric - Fine
- Corrosion Protection Level Excellent
- Class Grade A2-70 G304
- Material Stainless Steel
- Across Flats (af) 23.67 - 24.00mm
- Across Corners (ac) 26.75 - 27.70mm
- Nut Height Overall (b) 7.42 - 8.00mm
- Spanner Size (af) 24mm
- Closest size in imperial 5/8"
- Standard Made To DIN439
- Brand Bolt and Nut Australia
Dimensional data is a guide only. Tolerance differences exist between brands and batches
Matching Parts
Description
- Hex Thin Lock nuts are also referred to as lock or jam nuts. The correct use of a thin nut is to install it under the larger nut. The thin nut deforms and creates a locking action on the thread as the larger nut is tightened. Therefore the thin nut is more effective when it is soft
- Also known as: Hex Jam Nuts, Jam Lock Nuts, Half Nuts
- Material / Coating: Stainless Steel A2-70 G304 is the most popular grade of stainless steel. It is aesthetically pleasing to the eye and very practical because of its excellent corrosion protection in most environments. Most products can be identified by the following markings: A2, A2-70, 304 or G304 but not all nuts are stamped. Stainless steels are largely non-magnetic but it is common for some stainless steel fasteners to show a small degree of magnetism which is a result of work-hardening during the manufacturing process
- Can Stainless corrode?: Stainless steel is corrosion-resistant but not corrosion-proof and corrosion can occur if the material is installed or handled incorrectly. The use of tools and drills made from conventional steel during the installation of stainless steel fasteners may also lead to problems. Even the hardest of tools can produce debris that leaves minute steel particles on the stainless steel fastener surfaces or in pre-drilled holes. It is these particles that often rust when exposed to moisture or oxygen and can result in a stained or tarnished finish to the stainless steel material
- Galling: can occur when excessive pressure is used to tighten a nut onto a thread, common with stainless fasteners but can also be an issue with other materials. Fasteners with damaged or fine threads are particularly prone to galling.
Some suggestions to help prevent thread galling:
Tightening the nut more slowly without excessive pressure, will frequently reduce or sometimes solve completely, the problem. As the installation RPM speed increases, the heat generated with friction during tightening escalates the chances of thread galling.
Reduce the friction by applying a suitable lubricant to the thread frequently eliminates thread galling. Typical lubricants are chloride-paraffine, molykoat lacquer, molybdenum disulphide, high pressure oil, graphite, mica, or talc, some assemblies where there is extreme pressure, corrosion resistant grease or waxes may also be effective - Thread Pitch (Metric Fine): is the distance between the peaks of two threads along a screw, bolt, nut or fastener expressed in millimetres (mm). Used when referring to Metric parts. For example, a thread pitch of 1.00p means that the distance between one thread and the next is 1mm
- Measurements: Every effort has been made to ensure all measurements on our site are accurate and to the relevant standard, they should only be used as a guide. If you see a problem with our specifications please contact us
- Dimensions: Our stock is sourced from various suppliers, therefore differences may exist between batches such as height, width, visible stamped markings, appearance or actual finish
- Photos: are of the product but may not be the actual diameter, height, width, length you may require, always refer to the size in the description and additional specifications data provided prior to ordering
- Updating our site: If you see any problems with any of our specifications or you require additional information please contact us
- Disclaimer: Technical data and specifications were researched and compiled from numerous industry sources for the sole purpose of providing basic information. All material is advisory only and its use by anyone is entirely voluntary. Reliance on it for any purpose by anyone is at the sole risk of that person, and Bolt and Nut Australia is not responsible for any loss, claim or damages arising therefrom. In developing this information, Bolt and Nut Australia has made a determined effort to present it accurately
- Buy with confidence: ⇒ 10+ years experience selling online, > 19,000 stock lines, > 80 million pieces ex stock in Brisbane QLD
- Prices: include GST, a Tax Invoice and Free Standard Delivery anywhere in Australia
Delivery
Orders UNDER $30
Weigh less than 500grams
Exceptions: Tools, Kits, Bulky items = Sent as a parcel with tracking
Small orders that fit into the slot of your Letterbox are sent:
FREE with Aust Post Letter delivery with NO TRACKING and delivery between 4-12 business days
Or
Select a Quicker delivery service
- $8.00 Parcel Delivery 2-7 business days
- From $10.00 Express Delivery 1-4 business days
- From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday
Orders OVER $30
Weigh more than 500grams
Included is orders under $30 but weigh more than 500grams or wont fit in the slot of your letterbox
Including Large and Bulky heavy orders are sent:
FREE as a Parcel Delivery WITH TRACKING and delivery between 2-7 business days
Or
Select an Express delivery service
- From $10.00 Express Delivery 1-4 business days
- From $12.00 StarTrack PREMIUM Express Delivery 1-3 business days
Or
Click & Collect - Warehouse pickup
Unit 9, 93 Rivergate Place, Murarrie, QLDPlace your order online and we will have it ready within 2 hours. Call if required sooner
Pickup times between 8am - 5pm, Monday - Friday
All delivery dates are estimated and depend on stock availability, delivery location, service chosen, size of order, time of year, when order was placed e.g long weekends or sale periods.
Further delivery information can be found on our Delivery page on this website
Further delivery information can be found on our Delivery page on this website
Information
Supplier Details
| MPN | 41LMFS16150 |
Delivery Information
Orders under $30 (Bulky items sent as parcel for FREE)
- Aust Post UNTRACKED Letter – FREE
- Parcel – From $8
- Express – From $10
- Click and Collect – 2hrs
Orders over $30
- Parcel – FREE
- Express – From $10
- Click and Collect – 2hrs
